ESPectre
Device settings
Connect to an ESPectre on the same Wi-Fi network to rename it, choose an access point, or set up Home Assistant.
Manage a device on your local network
Device settings connects directly to an ESPectre on your network. From one page you can rename the sensor, check its Wi-Fi connection, choose an access point, set up MQTT, and check for firmware updates.
Settings go straight from this browser to the device. Saved MQTT credentials can be replaced or removed, but never read back.
Device connection
Checking…
Wi-Fi
Reconnect over USB to change Wi-Fi network.
If several access points share this network, choose the one ESPectre should stay connected to.
Optional integration
Checking…
MQTT
Use MQTT to add ESPectre to Home Assistant or another automation system.