Browser tools

Everything runs in your browser. Connect a device, or try the tools in demo mode.

ESP32 board connected to a laptop over USB for firmware installation

Install ESPectre

Install ESPectre over USB, then connect it to Wi-Fi or pair it with Matter.

Install ESPectre →

ESP32 board connected wirelessly to a configuration panel

Device settings

Rename your device or connect it to Home Assistant over MQTT.

Open device settings →

ESP32 board beside a laptop showing live motion sensing diagnostics

Live motion

Watch motion as it happens and adjust sensitivity.

View live motion →

ESP32-C3 beside a laptop displaying a luminous 3D CSI amplitude surface

CSI visualizer

See the raw Wi-Fi signal that motion detection is based on.

Open the visualizer →

ESPectre ghosts navigating an arcade maze controlled by an ESP32 board

Motion Game

Move in front of ESPectre to help the Spectre fly through an endless course.

ESP32 board turning Wi-Fi motion into an audio waveform

Motion theremin

Turn your movement into sound with a motion-controlled instrument.

ESP32 board exploring stationary presence sensing in a quiet room

Presence detection

Test whether small movements can distinguish a quiet occupied room from an empty one.

See the research plan →

ESP32 board sensing a brief hand gesture through Wi-Fi signal changes

Breathing and gestures

Study breathing-related movement and simple gestures as possible future capabilities.

See the research plan →